Universal Indicator N480i

This low cost and easy-to-use universal indicator can be programmed by non-experienced users. Full rangeability and a 24vDC output for remote transmitters are standard.

Universal Indicator N1500

High performance, universal panel mount indicator suitable for a variety of signals and sensors including RTD's, load cells, thermocouples, voltage and current. Large range of output options including relays, analogue retransmission and RS485 for connection to systems supporting the MODBUS protocol. Easy to program via front keypad, ultra bright display and universal switching power supply..

Large Digit Universal Indicator N1500-G

Similar features to the N1500 indicator however with large 56mm, ultra bright LED display. Suitable for applications where the display has to be viewed over a considerable distance.

N321 Electronic Thermostat

The N321 electronic thermostat are used to measure, indicate and control temperature in many different systems. Accepts 4 sensors types: Pt100, Pt1000, NTC or Thermocouple J. The user can program the control action according to the application: direct action (refrigeration) or reverse action (heating). The internal 10A relay can directly switch compressors or electrical heaters with ON/OFF control.

N321R Electronic Thermostat with Defrost Cycle

The N321R is a thermostat dedicated to applications in refrigeration. The defrost cycle is accomplished by turning off the compressor at time intervals chosen by the user. Pt100, Pt1000 and thermistor sensors inputs available. Adjust for ON and OFF durations. Auto defrost at programmable intervals. Manual Defrost key in the front pannel.

N322 Electronic Thermostat

Digital thermostat for heating and refrigeration purposes with 2 independent set-points. It has PT1000, thermistor NTC, PTC or J thermocouples inputs available

N322T Electronic Thermostat

Electronic thermostat for heating and refrigeration purposes with timer support. It has Pt1000, thermistor NTC, PTC or J thermocouples inputs available. Allows energy time delay and minimum on/off time settings.

N1100 Universal Process Controllers

The N1100 Series of universal process controllers provide a wide range of features that are needed for the vast majority of industrial processes. The N1100 accepts J, K, T, N, R, S Type Thermocouples, PT100 RTD, 4-20mA, 0-50mVdc or 0-5vDC inputs and features two SPST relays (option available for 1 SPDT relay) and RS485 Modbus RTU communications. Keypad programming is simple and intuitive and parameters setting can be selectively locked. The N1100 is suitable for simple temperature control applications up to compex systems of distributed control with PLC's or SCADA networks.

Universal Controller N2000

The N2000 Universal Process controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.

Universal Controller N2000-s

The N2000 Universal Process controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.

Universal Controller N3000

N3000 Big Digit Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.